UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52285

LogiCORE IP Video Scaler v6.00.a/v7.00.a/v7.01.a/v8.0/v8.1 - Why do the INTC_IF interface register and pins not behave as described in the documentation?

描述

Why do the INTC_IF interface register and pins not behave as described in the documentation?

解决方案

This is a known issue.

INTC_IF register interface pins do not work as expected, the affected pins/registers are listed below :

  • intr_coef_mem_rdbk_rdy
  • eol_error
  • sof_error 
  • intr_coef_wr_error

This issue affects the Video Scaler v6.00.a, v7.00.a, v7.01.a, v8.0 and v8.1.  

It is recommended that users ignore the INTC_IF interface.

If you are following the Coefficient readback process documented in PG009 LogiCORE IP Video Scaler Product Guide, you should wait two frames before attempting to read back the coefficients, rather than polling the intr_coef_mem_rdbk_rdy pin or register.

For more details on the eol_error issue, see (Xilinx Answer 52664)
For a detailed list of LogiCORE IP Video Scaler Release Notes and Known Issues, see (Xilinx Answer 31958).
For a detailed list of LogiCORE IP Video Scaler Release Notes and Known Issues, Vivado 2013.1 and newer tool versions see (Xilinx Answer 54540).

链接问答记录

主要问答记录

相关答复记录

AR# 52285
日期 09/17/2014
状态 Active
Type 已知问题
IP
  • Video Scaler
的页面