UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52321

Zynq-7000 ZC702 Getting Started Guide (UG926) - Default Jumper and Switch Settings

描述

The Zynq-7000 ZC702 Getting Started Guide v1.2.1 (UG926) lists the default Jumper and Switch settings in Table 1-1 and Table 1-2. These default Jumper and Switch settings are also shown in Figure 1-3 of the user guide, however, they do not match the information in the tables.

What are the correct default Jumper and Switch settings?

解决方案

The correct default Jumper and Switch settings for the ZC702 are provided in Table 1-1 and Table 1-2 of the Zynq-7000 ZC702 Getting Started Guide v1.2.1 (UG926) and should be used for reference.

Figure 1-3 has been updated in UG926 v4.0 and is now called Figure 1-4.  Figure 1-4 includes the correct jumper and switch settings which match Table 1-1.


链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
47864 Zynq-7000 AP SoC ZC702 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 52321
日期 11/08/2017
状态 Active
Type 综合文章
Boards & Kits
  • Zynq-7000 SoC ZC702 Evaluation Kit
的页面