AR# 52660


2012.3 - QSPI PROM files created from Vivado bitstreams fails to program FPGA


When creating a bitstream in Vivado targeting a QSPI, the documented constraint set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design] is used.

For Vivado and ISE, the default OPCODE when using this option should be 0x6B, Fast Quad Read. This is the default in Xilinx ISE 14.3, but in Vivado 2012.2 and 2012.3, the PROM does not receive the require opcode of 0x6B needed for Fast Quad Reads.


To resolve this issue, the following constraint must be added:

set_property BITSTREAM.CONFIG.SPI_OPCODE 0x6B [current_design ]

This issue will be resolved in the 2012.4 release.
AR# 52660
日期 10/31/2012
状态 Archive
Type 综合文章
器件 More Less
People Also Viewed