描述

解决方案

Usage

• (Xilinx Answer 63590) 7 Series GT Wizard, 2014.4 or earlier - Update to GTZ reset sequence implementation
  
• (Xilinx Answer 59038) 7 Series FPGA GTZ Transceiver - Recommended GTZ Reset Sequence
• (Xilinx Answer 59039) Virtex-7 HT FPGA GTZ Transceiver - BUFGCTRL and BUFG_LB locations and constraints
• (Xilinx Answer 56186) Virtex-7 HT FPGA GTZ Transceiver - VMGTZAVCC and VMGTZAVCCL for Initial ES Silicon
• (Xilinx Answer 55958) Virtex-7 GTZ Transceiver - PLL settings parameter CORECNTLn[10] incorrect in table 2-5 of GTZ user guide v2.0
• (Xilinx Answer 51564) Virtex-7 HT FPGA GTZ Transceiver Power-Up/Power-Down
• (Xilinx Answer 54603) Use of MGTZ_THERM_IN/OUT pins in 7 series GTZ

Wizard/Tools

• (Xilinx Answer 61165) 2014.1 - 7 Series GTZ example design constraints only targets one of two OCTAL's
• (Xilinx Answer 59269) 7 Series FPGA GTZ Transceiver Wizard v3.1: TXPHASECALENn value incorrect
• (Xilinx Answer 59135) 7 Series FPGA GTZ Transceiver - CTLE tuning reliability and TX flatline
• (Xilinx Answer 54691) IP Release Notes and Known Issues for 7 Series FPGAs Transceivers Wizard for Vivado 2013.1 and newer versions
• (Xilinx Answer 58086) Known Issues and Work-arounds with 7 Series GTZ Transceiver Wizard in Vivado 2013.3
• (Xilinx Answer 57954) Virtex-7 HT - GTZ Transceiver Wizard Pre-Production and Production Status
• (Xilinx Answer 55791) Design Advisory for 7 Series FPGAs Transceivers Wizard - Required Updates to Wizard v2.5
• (Xilinx Answer 56220) 7 Series GTZ Wizard v2.6 - TXRATESELn/RXRATESELn[8:0] value set incorrectly for 14.025 Gbps line rate and 212.5 MHz reference clock
• (Xilinx Answer 55422) Virtex-7 HT GTZ MULTI_LANE_MODE value for x8 multi-lane mode is incorrectly set by GT wizard
• (Xilinx Answer 46048) 7 Series FPGA Transceivers Wizard - Which silicon revisions are supported by different Wizard or ISE/Vivado tool versions?
• (Xilinx Answer 52261) Known Issues and Work-arounds with 7 Series GTZ Transceiver Wizard in Vivado 2012.3
• (Xilinx Answer 51016) Known Issues and Work-arounds with 7 Series GTZ Transceiver Wizard in Vivado 2012.2
• (Xilinx Answer 52263) 7 Series FPGAs Transceivers Wizard v2.3 - Known Issues and Release Notes
• (Xilinx Answer 53560) Known Limitations with 7 Series GTZ Transceiver Wizard in Vivado 2012.4

IBERT

• (Xilinx Answer 55683) 2013.1 IBERT implementation error
• (Xilinx Answer 53721) 2012.4 - IBERT - IBERT 7 series GTZ flow script and instructions