UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53466

Spartan-6 FPGA Triple Rate SDI v1.0 - How do I create constraints for the Spartan-6 Triple Rate SDI core?

描述

I am trying to use the Spartan-6 FPGA Triple Rate SDI v1.0 core in my design, but I have found a syntax error in the .ucf file provided with this core. How do I correct this and create proper constraints for the Spartan-6 Triple Rate SDI core?

Here is the multi cycle path section in the UCF:

NET */FRM/dly_reg* TNM = frm_in;
TIMEGRP frm_ffs = FFS ("*/FRM/*") frm_out;
TIMESPEC TS_rx1_frm_sd = FROM frm_in THRU frm_sd_thru TO frm_ffs 54 MHz;
TIMEGRP test_dest = FFS (*/FRM/offset_reg*); TIMESPEC TS_test = THRU test_thru TO test_dest 54 MHz; # These constraints relax the timing on the DRU, used for SD-SDI This path # only has to run at SD-SDI clock rate of 74.25 MHz. # TIMEGRP dru_ffs = FFS (*/DRU*/*); TIMESPEC TS_dru_ffs = TO dru_ffs 74.25 MHz;

However, frm_sd_thru and test_thru are not defined anywhere in the UCF.

解决方案

This is a known issue with this version of the core.

To work around this problem, you can pull the constraints from the XAPP1076 reference design.

For a detailed list of LogiCORE IP Spartan-6 FPGA Triple-Rate SDI Release Notes and Known Issues, see (Xilinx Answer 42805).

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
42805 LogiCORE IP Spartan-6 FPGA Triple-Rate SDI (Serial Digital Interface) - Release Notes and Known Issues N/A N/A
AR# 53466
日期 12/18/2013
状态 Active
Type 综合文章
器件
  • Spartan-6 LXT
IP
  • Spartan-6 FPGA Triple-Rate SDI
的页面