UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53808

Spartan-6 FPGA SP605 Evaluation Kit - Dimensions changed

描述

Spartan-6 FPGA SP605 Evaluation Kit dimensions have changed in order to make the SP605 CE compliant.

This change in dimensions was needed to implement extra EMI filter circuitry around each regulator on the kit.

解决方案

The Spartan-6 FPGA SP605CE compliant kits are 0.5 inches longer than previous board versions. The height ofthe kit did not change. The back end mounting holes of the CE compliant kit were moved by 0.5 inches. You can identify the CE-complaint SP605 through the number marked on the sticker on the underside of the board. For CE compliant SP605, this will begin with "0431767".
The physical sizes can be found in the respective BRDfiles and Gerbers as shown below.
Spartan-6 FPGA SP605 CE PCB dimensions 4.199 inches H x 8.100 inches L:
53808-1.jpg
53808-1.jpg
Spartan-6 FPGA SP605 non-CE PCB dimensions 4.199 inches Hx 7.600 inches L:
53808-2.jpg
53808-2.jpg


链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
33839 此解答记录罗列出了所有有关SP605评估套件的已知问题。 N/A N/A
AR# 53808
日期 01/17/2013
状态 Active
Type 综合文章
Boards & Kits
  • Spartan-6 FPGA SP605 Evaluation Kit
的页面