We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53862

Zynq-7000 SoC ZC706 Evaluation Kit - SW4 settings for the ZC706


Switch SW4 dictates which cable is used to connect to the ZC706 board - whether the Platform Cable USB II or the Digilent A to micro-B JTAG cable shipped in the kit box.

What are the correct settings to use each of these cables with the ZC706 board?


The configuration option on the ZC706 board is selected by using SW4. Switch 1 and Switch 2 of DIP switch SW4 are clearly marked on the board. The configuration options are set as follows:




Answer Number 问答标题 问题版本 已解决问题的版本
51899 Zynq-7000 SoC ZC706 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 53862
日期 05/17/2018
状态 Active
Type 综合文章
Boards & Kits