UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54036

Zynq-7000 AP SoC ZC706 - UG963 (v1.0) - SW11 switch settings incorrect for SD card boot

描述

UG963, ZC706 PCIe TRD User Guide (v1.0), outlines steps to program the Quad-SPI Flash Memory with files from the SD card to run the Zynq-7000 PCIe TRD from page 13.

Figure 2-3, page 14, shows the SW11 Quad-SPI Flash Memory Settings; however, these are incorrect in UG963 v1.0.

What are the correct SW11 settings to boot from the SD card?

解决方案

In order to program the Quad-SPI Flash Memory with files from the SD card on the ZC706, SW11 needs to be set to 00110, as shown below:

 

54036-1.jpg

 

SW11 settings have been corrected in UG963, ZC706 PCIe TRD User Guide (v2.0).

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
51899 Zynq-7000 AP SoC ZC706 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 54036
日期 11/13/2017
状态 Active
Type 综合文章
Boards & Kits
  • Zynq-7000 SoC ZC706 Evaluation Kit
的页面