We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54163

LogiCORE IP Tri-Mode Ethernet MAC v5.5 - Vivado - Windows - core XDC file is not correctly loaded after opening the Implemented design


When using the Tri-Mode Ethernet MAC v5.5 example design in Vivado 2012.4 on a Windows machine, the core level XDC file is not properly loaded when opening the implemented design.  

Critical warnings similar to the following are received:

unrecognised command 'current_instance' in core_name.xdc

The XDC constraints are not properly loaded for running Timing Reports.


This can be worked around by manually loading the XDC file after the implemented design is opened:

  1. Run synthesis.
  2. Run implementation.
  3. Open the implemented design.
  4. Read the XDC file with the following command:
read_xdc -cells trimac_fifo_block/trimac_block/inst C:/path_to_project/example_project/core_name_example/core_name_example.srcs/sources_1/ip/core_name/synth/core_name.xdc
AR# 54163
日期 11/24/2014
状态 Active
Type 综合文章
  • Tri-Mode Ethernet MAC