We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54525

LogiCORE IP Image Enhancement - Release Notes and Known Issues for Vivado 2013.1 and newer tool versions


This answer record contains the Release Notes and Known Issues for the LogiCORE IP Image Enhancement core and includes the following:

  • General Information
  • Known and Resolved Issues
  • Revision History

This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.1 and newer tool versions.
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.

LogiCORE IP Image Enhancement core IP Page:

Note: This core was formerly called the Image Edge Enhancement core.


General Information

Supported devices can be found in the following three locations:

For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado design tools.

Version Table

This table correlates the core version to the first Vivado design tools release version in which it was included.

Vivado Tools
v8.0 (Rev. 3) 2014.1
v8.0 (Rev. 2) 2013.4
v8.0 (Rev. 1) 2013.3
v8.0 2013.2
v7.0 2013.1

General Guidance

The table below provides answer records for general guidance when using the LogiCORE IP Image Enhancement core.

Answer Record Title

Known and Resolved Issues

The following table provides known issues for the LogiCORE IP Image Enhancement core, starting with v7.0, initially released in Vivado 2013.1.

Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Answer Record Title Version Found Version Resolved
(Xilinx Answer 61998) What values are legal for various core parameters? v8.0 N/A
(Xilinx Answer 60173) Why does the Image Enhancement core output data in the wrong columns after changing the number of columns via the AXI4-Lite interface? v8.0 N/A
(Xilinx Answer 57773) Why does the TREADY stall when using the TEST_PATTERN or BYPASS options available in some of the Video IP when the Include Debug Features option is enabled at generation? v5.01.a v8.0 (Rev. 3)
(Xilinx Answer 52215) Why does my core fail timing with a Critical Warning? v5.01.a v8.0 (Rev. 1)
(Xilinx Answer 56274) Vivado 2013.2 Multimedia Video and Imaging - How do I properly constrain the Video IP in my design? v7.0 v8.0 (Rev. 1)
(Xilinx Answer 55980) Why do I see write failures on the AXI4-Lite bus, when the AXI4-Stream clock is at a different frequency than the AXI4-Lite interface clock? v7.0 v7.0 (Rev. 1)

Revision History:

09/10/2014 - Added (Xilinx Answer 61998).
10/23/2013 - Added v8.0 (Rev. 2) and v8.0 (Rev. 3) to Version Table, (Xilinx Answer 60173) and updated Known and Resolved Issues table for 2014.1.
10/23/2013 - Added v8.0 (Rev. 1) to Version Table, (Xilinx Answer 57773) and updated Known and Resolved Issues table for 2013.3.
06/19/2013 - Added v8.0 to Version Table, (Xilinx Answer 56274), (Xilinx Answer 55980)
04/03/2013 - Initial Release



Answer Number 问答标题 问题版本 已解决问题的版本
56852 Xilinx Multimedia, Video and Imaging Solution Center - Top Issues N/A N/A



Answer Number 问答标题 问题版本 已解决问题的版本
61625 Video IP Example Design Landing Page N/A N/A
AR# 54525
创建日期 02/24/2013
Last Updated 11/10/2014
状态 Active
Type 版本说明
  • Vivado Design Suite - 2013.1
  • Image Enhancement