This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.1 and newer tool versions.
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.
LogiCORE IP Motion Adaptive Noise Reduction (MANR) core IP Page:
Note: Not recommended for new designs. The core is removed from IP catalog as of 2014.1. Please contact Xylon, our IP partner, for solutions related to motion adaptive noise reduction.
|Vivado Tools |
|v6.0 (Rev. 3)||2013.4|
|v6.0 (Rev. 2)||2013.3|
|v6.0 (Rev. 1)||2013.2|
The table below provides answer records for general guidance when using the LogiCORE IP Motion Adaptive Noise Reduction (MANR) core.
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP Motion Adaptive Noise Reduction (MANR) core, starting with v6.0, initially released in Vivado 2013.1.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 57690)||Why do I see ghosting artifacts in my image when using the MANR?||v6.0||v6.0 (Rev. 3)|
|(Xilinx Answer 56274)||Vivado 2013.2 Multimedia Video and Imaging - How do I properly constrain the Video IP in my design?||v6.0||v6.0 (Rev. 2)|
|(Xilinx Answer 55980)||Why do I see write failures on the AXI4-Lite bus, when the AXI4-Stream clock is at a different frequency than the AXI4-Lite interface clock?||v6.0||v6.0 (Rev. 1)|