This answer record contains the Release Notes and Known Issues for the LogiCORE IP SDI RX to Video Bridge core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in the Vivado 2013.1 tool and later versions.
LogiCORE SDI RX to Video Bridge Core IP Page:
NOTE: Not recommended for new designs. The core is removed from IP catalog as of 2014.2.
Users who need a bridge from SDI to AXI can request an unsupported copy of the source code for the SDI Bridges from the SDI to Video Brides lounge.
Supported devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
Table 1: Version
This table correlates the core version to the first Vivado design tools release version in which it was included.
|Vivado Tools |
Table 2: General Guidance
The table below provides answer records for general guidance when using the LogiCORE SDI RX to Video Bridge Core.
Known and Resolved Issues
The following table provides known issues for the SDI RX to Video Bridge core, starting with v1.0, initially released in the Vivado 2013.3 tool.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 59336)||Why does the rx_mode decoding differ from the rx_mode in the SMPTE SD/HD/3G-SDI core?||v1.0 (PG179)||N/A|
02/06/2014 - Added (Xilinx Answer 59336)
10/23/2013 - Initial release