UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54546

HDMI Receiver (Rx) Subsystem - Release Notes and Known Issues for the Vivado 2013.1 tool and later versions

Description

This answer record contains the Release Notes and Known Issues for the HDMI Receiver (Rx) Subsystem and includes the following:

  • General Information
  • Known and Resolved Issues
  • Revision History

This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2015.1 and forward.

HDMI Receiver (Rx) Subsystem Page:

http://www.xilinx.com/products/intellectual-property/hdmi.html

解决方案

General Information:

Supported Devices can be found in the following three locations:

For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.

Version Table:

This table correlates the core version to the first Vivado design tools release version in which it was included.

Core VersionVivado Tools Version
v2.0 (Rev. 1)2016.2
v2.02016.1
v1.02015.4

 

General Guidance:

The table below provides Answer Records for general guidance when using the HDMI Receiver (Rx) Subsystem.

Article NumberArticle Title
(Xilinx Answer 67045)Do the DDC Signals need to be connected if using the HDMI core in DVI only mode without HDCP?
(Xilinx Answer 66741)Do I need to have both the HDCP 1.4 and HDCP 2.2 cores or is HDCP 2.2 a superset of HDMI 1.4?

Known and Resolved Issues:

The following table provides known issues for the HDMI Receiver (Rx) Subsystem, starting with v1.0, initially released in Vivado 2015.4.

Note: The "Version Found" column lists the version the problem was first discovered.

The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Article NumberArticle TitleVersion FoundVersion Resolved
(Xilinx Answer 67505)Why do I encounter error "ERROR: [Synth 8-2841] use of undefined macro kCFG_TX_PHY_BUF_RST " during Synthesis?v2.0
(Xilinx Answer 67292)HDMI RX Subsystem incorrectly detects1080p 16bits bpc video source v2.0v2.0 (Rev. 1)
(Xilinx Answer 67306)Why do I get "WARNING: [BD 41-1284] Cannot set parameter SUGGESTED_PRIORITY on port /hdcp14_irq" when validating my design containing an HDMI Receiver Subsystem with HDCP 1.4 is included?v2.0N/A
(Xilinx Answer 67242)Why do I get errors from devices using DDC short reads?v2.0v2.0 (Rev. 1)
(Xilinx Answer 67241)Why do I see that the start-of-block bit is only being set for the Channel 0-1 pair and not for the other audio pairs?v2.0v2.0 (Rev. 1)
(Xilinx Answer 67126)Why does (PG236) Table 4-2: Device and Speed Grade Selections indicate that Kintex-7/Virtex-7 -1 speed grade parts are higher performance?v2.0v2.0 (Rev. 1)
(Xilinx Answer 66849)Why do I get a Critical Warning when connecting a YUV 4:2:2 AXI4-Stream input to the HDMI RX or TX Subsystems?v1.0N/A
(Xilinx Answer 66504)Why does the output video look incorrect when receiving 720p59/60 and WXGA+ at 10-bits per component (BPC)?v1.0N/A
(Xilinx Answer 66380)The License type is set to "Included" but a Purchased license is required to generate output products?v1.0N/A

Revision History:

07/07/2016Added (Xilinx Answer 67292) and (Xilinx Answer 67505)
06/08/2016Added v2.0 (Rev. 1) to the Version Table
06/02/2016Added (Xilinx Answer 67306)
05/17/2016Added (Xilinx Answer 67241) and (Xilinx Answer 67242)
04/28/2016Added (Xilinx Answer 67126)
04/15/2016Added (Xilinx Answer 67045)
04/06/2016Added v2.0 to the Version Table, and (Xilinx Answer 66849)
03/01/2016Added (Xilinx Answer 66741)
01/28/2016Added (Xilinx Answer 66504)
01/12/2016Added (Xilinx Answer 66380)
11/24/2015Initial Release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
56851 Xilinx Multimedia, Video and Imaging Solution Center N/A N/A

子答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
66380 HDMI RX Subsystem v1.0 and HDMI TX Subsystem v1.0 - The License type is set to "Included", but a Purchased license is required to generate output products N/A N/A
66504 HDMI RX Subsystem v1.0 - Why does the output video look incorrect when receiving 720p59/60 and WXGA+ at 10-bits per component (BPC)? N/A N/A
66741 HDMI RX/TX Subsystem - Do I need to have both the HDCP 1.4 and HDCP 2.2 cores or is HDCP 2.2 a superset of HDMI 1.4? N/A N/A
66849 HDMI RX/TX Subsystem v1.0 - Why do I get a Critical Warning when connecting a YUV 4:2:2 AXI4-Stream input to the HDMI RX or TX Subsystems? N/A N/A
66989 LogiCORE Video PHY Controller v2.0 - Why do I get a Critical Warning on GT placement when multiple Video PHY Controllers are used in my project? N/A N/A
67045 HDMI RX Subsystem - Do the DDC Signals need to be connected if using the HDMI core in DVI only mode without HDCP? N/A N/A
67126 HDMI Subsystem Receiver v2.0 - Why does PG236 Table 4-2: Device and Speed Grade Selections indicate that Kintex-7/Virtex-7 -1 speed grade parts are higher performance? N/A N/A
67223 2016.1 - HDMI Receiver Subsystem, Software Driver v2.0 - HDMI Receiver Subsystem Software Driver v2.0 Patch Download N/A N/A
67241 HDMI Receiver Subsystem v2.0 - Why do I see that the start-of-block bit is only being set for the Channel 0-1 pair and not for the other audio pairs? N/A N/A
67242 HDMI Receiver Subsystem v2.0 - Why do I get errors from devices using DDC short reads? N/A N/A
67306 HDMI 接收器子系统 v2.0 — 验证包含 HDMI 接收器子系统(支持 HDCP 1.4)的设计时,出现了“警告:[BD 41-1284] 无法设置参数 SUGGESTED_PRIORITY on port /hdcp14_irq” N/A N/A

相关答复记录

AR# 54546
创建日期 02/24/2013
Last Updated 07/14/2016
状态 Active
Type 版本说明
IP
  • HDMI