We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54559

14.4 - EDK - XPS - How can I make the AXI Datamover's M_AXIS_MM2S and S_AXIS_S2MM bus interfaces external?


How can I make the AXI Datamover's M_AXIS_MM2Sand S_AXIS_S2MM bus interfaces external?


By default the M_AXIS_MM2Sand S_AXIS_S2MM bus interfaces are not added under the ports tab. To add these, check the "Port Filters -> By Connection -> Defaults in the XPS System Assembly view on the far right of the GUI.

Note: The XPS tool will add a buffer by default on all external ports. To stop the tools from doing this, use the buffer_type=none keyword in the external port definition in the MHS file in XPS. See (Xilinx Answer 53769) for help here.

Note: This flow is not tested by Xilinx.

AR# 54559
日期 02/25/2013
状态 Active
Type 综合文章