UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54611

LogiCORE IP Video Timing Controller v5.01.a - Why does Video Timing Controller Generator reset early in relation to the Blanking Signals, if both the detector and the generator are enabled?

Description

Why does Video Timing Controller Generator reset early in relation to the Blanking Signals, if both the detector and the generator are enabled?

This only happens when the Detector and the Generator are both enabled, and the Detector is set up to only detect the Blanking inputs, but not the Sync inputs.

解决方案

This is a known issue in the Video Timing Controller v5.01.a.

It is fixed in the Video Timing Controller v5.01.a Rev2 or later pcore patch, and in the Video Timing Controller v6.0.

For a detailed list of LogiCORE IP Video Timing Controller Release Notes and Known Issues, see (Xilinx Answer 32754).

链接问答记录

主要问答记录

AR# 54611
创建日期 02/27/2013
Last Updated 12/23/2014
状态 Active
Type 综合文章
IP
  • Video Timing Controller