We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5499

JTAG - Configuring multiple devices in a JTAG chain, do you need to buffer the TMS and TCK?


Multiple devices in a JTAG chain can reduce the signal quality of the TMS and TCK signals which are connected in parallel. Is there a rule of thumb for when to add buffers to these signals?


The answer is dependent on the environment and the cable. The experimental rule of thumb is that after five devices, the signals should run through a buffer. However, under noisy circumstances, buffers may be needed when using less than 3 devices.

The LS244 is an example of a buffer that has been used successfully with our devices.

AR# 5499
日期 02/04/2013
状态 Active
Type 综合文章