UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55446

XAUI v10.4 - 7 Series - Required GTP/GTX and GTH transceiver updates

描述

If using XAUI v10.4 in ISE 14.5 and earlier, there are several GT updates that are required:

1) Updates for production GTP (10G and 20G operation) and GTH (10G operation) transceiver reset logic, see (Xilinx Answer 53561) and (Xilinx Answer 53779).

2) TX buffer bypass on GTP/GTX and GTH transceivers, see (Xilinx Answer 55009).

3) GTP/GTH RX termination is set incorrectly to GND, see (Xilinx Answer 55837).

解决方案

These updates have been made in the v10.4 rev1core available in ISE 14.6 and later.

The first two updates have been included in the v11.0 core released in Vivado Design Suite 2013.1, the third has been included in the v12.0 core released in Vivado Design Suite 2013.2.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
47684 LogiCORE IP XAUI - Release Notes and Known Issues for v10.x N/A N/A

相关答复记录

AR# 55446
日期 09/17/2013
状态 Active
Type 综合文章
IP
的页面