UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 555

Error es14 or es6: Too many shared D1 product terms

Description

Fitnet issues one of the following errors:

es14:[Error]Too many D1 shared product terms. '<n>' required!

es6:[Error]Too many shared D1 product terms needed for equation '<xxxx>'!
<n> product terms needed but only 4 available. You have either
explicitly specified a D1 signal or an XOR or .T function resolves to
a function containing D1.

解决方案

Often caused by an XOR7 or XOR8 gate feeding the input to a BUFT, BUFE,
or OBUFE component.

If the enable signal of the buffer cannot be placed onto an FOE, it will
use one of the private product terms in the macrocell. This reduces the
maximum number of product terms available to the D1 signal in that macrocell.
Fitnet still attempts to optimize the XOR gate into the same macrocell,
causing the error.

Place an OPT=OFF attribute on the XOR gate, or break wide XOR gates into
smaller XOR gates.

If using the Synopsys interface, either place a NO_OPT attribute on the
XOR output signal, or specify the following:

dont_use {xc7000/XOR7 xc7000/XOR8}
AR# 555
创建日期 08/31/2007
Last Updated 10/01/2008
状态 Archive
Type 综合文章