AR# 56043

LogiCORE IP Video Scaler v7.00.a - Software reset does not work

描述

I am attempting to issue a soft reset to the Video Scaler via the AXI Lite Interface. However, the core appears to still be outputting video and does not seem to reset properly at all.

The software reset is bit 31 of the Control register located at 0x0000.

解决方案

This is a known issue that the software reset in the Video Scaler v7.00.a, v7.01.a and v8.0 only resets the AXI4-Lite Interface.

This issue has been resolved in the Video Scaler v7.01.a Rev2 patch for ISE Design Suite and EDK tools.
This issue has been resolved in the Video Scaler v8.1 for the Vivado tools.

To perform a proper full reset of the core, you must drive core_aresetn Low.

For a detailed list of LogiCORE IP Video Scaler Release Notes and Known Issues, see (Xilinx Answer 31958).
For a detailed list of LogiCORE IP Video Scaler Release Notes and Known Issues for Vivado 2013.1 and newer tool versions, see (Xilinx Answer 54540).

链接问答记录

主要问答记录

AR# 56043
日期 07/01/2013
状态 Archive
Type 综合文章
IP