UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56451

MIG 7 Series and Virtex-6 DDR3/DDR2 - UG586 and UG406 have incorrect signal descriptions for the native interface "cmd" signal

描述

For both the Virtex-6 and 7 series FPGA MIG DDR3/DDR2 designs, the "cmd" signal is the Native Interface input that selects the command for the current request.

In the Virtex-6 and 7 series FPGA Memory Interface User Guides (UG406 and UG586), the codes for the "cmd" bus are incorrect; showing a read is signified by "000" and a write by "001".

解决方案

This will be resolved in a later revision of these two documents.

Be sure to signify a read with "001" and a write with "000" when interfacing to the Native Interface. The tables for the app_cmd input to the User Interface are correct.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado N/A N/A
AR# 56451
日期 07/26/2013
状态 Active
Type 已知问题
器件
IP
的页面