UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5688

LogiCORE PCI - In my target application, STOP_IO is asserted, S_TERM is low, and S_READY is High

Description

General Description:

Table 6-1 "Data Phase Control Signals for Targets" in the PCI32 User's Guide describes 4 conditions for a target application based upon the values of S_TERM and S_READY. The second condition, "Normal", states that STOP_IO is value logic high in this condition.

It is possible that STOP_IO may actually be logic Low, despite S_TERM being Low and S_READY being High.

解决方案

In a circumstance where an invalid address location (i.e., one that does not end in a 0, 4, 8, or C) is supplied to the target, the target may assert STOP_IO to indicate an invalid attempt at a transaction.

This is one of various possible conditions that might cause STOP_IO to be asserted.

AR# 5688
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章