UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57382

GTX - TXPHINITDONE does not go High during simulation in ISIM

描述

During phase alignment of master/slave GTX, the TXPHINITDONE of slave GTX does not go High.

解决方案

This problem only happens when the RX side of the transceiver is not used. This is a known issue in ISIM and CR#735397 has been filed.

You can use one of the following as a work-around:

  • Use ModelSim for simulation.
  • Instead of ISE design tools, use the Vivado tool.
  • Include dummy RX channels in the design by unchecking "RX OFF" on page 2 of 7 series transceiver wizard as shown below:

AR# 57382
日期 09/26/2013
状态 Active
Type 已知问题
器件
  • Kintex-7
Tools
  • ISE Design Suite - 14
IP
  • 7 Series FPGAs Transceivers Wizard
的页面