UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57618

Virtex-7 FPGA VC709 Connectivity Kit - What is the SODIMM capacity of the VC709?

描述

The VC709 ships with 2 SODIMMs on board, each with 4 GB up to 1600MTs.

Can this capacity be changed?

解决方案

The Virtex-7 FPGA VC709 Connectivity Kit can support two 8 GB SODIMMs. However, this configuration has not been tested.

All 16 address lines are wired to the FPGA, as well as the 2 rank selects S#0 and S#1.

The VC709 was designed to support 1600MTs:

216A[15:0]* 23BA[2:0] * 2 Ranks S#[1:0] * 8Bytes per 64bit SODIMM = (65536)*(8)*(2)*8 = 8GBytes

Note: The VC709 has ONLY been tested with 4 GB Single Rank SODIMMs, MT8KTF51264HZ-1G9. Therefore, the S#1 net is not tested during production testing.

Using Dual Rank is the only way to achieve 8 GB on a DDR3 SODIMM (Single Rank design will only get to 4 GB).

MIG currently supports Dual Rank SODIMM, but none are supported at 1866 Mbps. 

Frequency support for dual rank parts is dropped down by one memory speed grade. 

See Table 18 in DS183 for reference.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
51901 Virtex-7 FPGA VC709 连接套件 — 已知问题与版本说明的主要答复记录 N/A N/A
AR# 57618
日期 05/01/2014
状态 Active
Type 综合文章
Boards & Kits
的页面