AR# 58668

MIG 7 Series - Simulation of the MIG example designs using XSIM must be run through the Vivado tool; standalone support is not available even though scripts are provided

描述

Version Found: MIG 7 Series v2.0 Rev 2
Version Resolved: See (Xilinx Answer 54025)

XSIM simulations using the MIG provided xsim_run.sh/.bat fail becase the rtl files such as example_top.v/vhd, sim_tb_top.v and memory models are being referred from different locations.

解决方案

The xsim_run script files will be updated at a later date with the appropriate paths. Until then, simulation using XSIM should be completed through the Vivado tool and not standalone.

Revision History
12/18/2013 - Initial release

AR# 58668
日期 12/05/2013
状态 Active
Type 已知问题
器件
IP