UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 592

PROFLOW: Does not call PPR with all user-defined parameters (PPR.PRO problem)

Description

PROflow is not passing the user defined options to PPR correctly.

PROflow writes out a PPR.PRO parameter file to specify which options should
be used when routing. PROflow must also write to the XDM.PRO profile that the
PPR.PRO parameter file should be used when XMAKE calls PPR. For some of the
options in the advanced implementation options dialog, PROflow does NOT write
the appropriate directive in the XDM.PRO profile to tell XMAKE to use the
PPR.PRO parameter file.

解决方案

In order to get PROflow to write the correct line in the XDM.PRO profile so
that XMAKE will call ppr using the PPR.PRO parameter file, create an empty
constraints file. Specify that the constraints file be used in the design
implementation dialog control files section.




AR# 592
创建日期 08/31/2007
Last Updated 10/01/2008
状态 Archive
Type 综合文章