UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59291

LogiCORE DisplayPort - Does the DisplayPort Source DPCD Main Stream Attributes register have to match the timing of the video being input to the User Data interface?

描述

Does the DisplayPort Source DPCD Main Stream Attributes register have to match the timing of the video being input to the User Data interface?

The DPCD registers 0x180 -> 0x1A0 are for the Main Stream Attributes.

解决方案

The DisplayPort Source DPCD registers 0x180 -> 0x1A0 for the Main Stream Attributes are used to set the values of the video being transmitted. These values should also match the video timing that is being input to the core on the User Data interface. These registers are not intended to be a way to convert the video format or timing.

If you want to change the video timing, such as inverting the Sync and Blank signals, you should look at the Video Timing Controller IP. This IP detects the input video timing and can then generate new timing signal based on the detected timing, or it can be customized to generate new timing.

链接问答记录

主要问答记录

AR# 59291
日期 01/31/2014
状态 Active
Type 综合文章
IP
  • DisplayPort
  • Video Timing Controller
的页面