UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59327

PetaLinux 2013.10 - Device Tree Generator does not connect interrupt lines for 7 series PCIe blocks

描述

I have connected the interrupt_out pin on the 7 series PCIe block to the Zynq PS7 interrupt lines in my IPI block diagram, but the PetaLinux device tree generator does not connect set the "interrupts" and "interrupt-parent" parameters in the PCIe peripherals' DTS node.

解决方案

This is a known issue in PetaLinux 2013.10.

As a work-around, manually declare the "interrupts" and "interrupt-parent" parameters in the DTS file located in the <PETALINUX_PROJECT>\subsystems\linux\hw-description\system.dts file.

AR# 59327
日期 02/10/2014
状态 Active
Type 综合文章
器件
  • SoC
  • Zynq-7000
Tools
  • PetaLinux
  • Vivado Design Suite
  • PetaLinux - 2013.10
IP
  • PCI-Express (PCIe)
  • 7 Series Integrated Block for PCI Express (PCIe)
的页面