UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59714

MIG 7 Series - recustomization of MIG core in Vivado removes and fails to regenerate some files

描述

Version Found: MIG 7 Series v2.0 Rev 2
Version Resolved: See (Xilinx Answer 54025)

When regenerating the MIG 7 Series IP core, files are removed and then regenerated. 

However, the following files are not regenerated which will cause simulation and possibly implementation errors:

<component_name>_mig.v/.vhd file 

<component_name>_mig_sim.v/.vhd


解决方案

This is a known issue in Vivado 2013.4 and will be fixed in a future release. 

You can work around the problem by saving the previously generated files and replacing them after regeneration has completed or you can generate a new core.

Revision History

03/11/2014 - Initial Release


链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado N/A N/A
AR# 59714
日期 04/16/2014
状态 Active
Type 已知问题
器件
IP
的页面