UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx -灵活应变. 万物智能.
  2. 技术支持
  3. AR# 59731: Zynq-7000 SoC ZC702 Evaluation Kit - 2013.4 Base TRD - Monitor may not synch-up

AR# 59731

Zynq-7000 SoC ZC702 Evaluation Kit - 2013.4 Base TRD - Monitor may not synch-up

描述

When using the 2013.4 ZC702 Base Targeted Reference Design, an issue can arise where a particular monitor does not synch up and QT GUI does not appear on the display monitor as expected.

This Answer Record includes a work-around that can be applied in this case.

解决方案

If a particular monitor does not synch up when using the 2013.4 ZC702 Base Targeted Reference Design, and QT GUI does not appear on the display monitor as expected, please follow the steps below:

  1. Ensure that the board is powered and connected to the display monitor.
  2. Plug out the HDMI display cable from the ZC702 base board.
  3. Plug the HDMI cable back in to the ZC702 base board.
  4. The QT GUI should appear on the monitor; click the Min button to set the GUI in the correct position.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
52941 Zynq-7000 SoC 基本目标参考设计 — 版本说明和已知问题的主要答复记录 N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
52941 Zynq-7000 SoC 基本目标参考设计 — 版本说明和已知问题的主要答复记录 N/A N/A
AR# 59731
日期 05/28/2018
状态 Active
Type 综合文章
Boards & Kits
  • Zynq-7000 SoC ZC702 Evaluation Kit
的页面