UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59904

10-Gigabit Ethernet PCS/PMA (10GBASE-KR) - Verilog - Auto Negotiation - Configuration Vector - Link Training does not start automatically

描述

When using the 10-Gigabit Ethernet PCS/PMA v4.1 or earlier with the following configuration:
- 10GBASE-KR
- Verilog
- Configuration Vector (No MDIO)
- Auto-Negotiation Enabled

Link Training does not start automatically.

解决方案

To resolve this, change the line below in core_name_block.v on the instantiation of the core itself (ten_gig_eth_pcs_pma_v4_1).


 From

      .configuration_vector(configuration_vector),

 

To:

       .configuration_vector(configuration_vector_i),

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
54669 10-Gb 以太网 PCS/PMA (10GBASE-R/10GBASE-KR) -面向 Vivado 2013.1 和更新工具版本的版本说明和已知问题 N/A N/A
AR# 59904
日期 04/17/2014
状态 Active
Type 综合文章
IP
  • 10 Gigabit Ethernet PCS-PMA with FEC/Auto-Negotiation for backplanes (10GBASE-KR)
的页面