UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60000

MIG 7 Series - Artix-7 - MIG 7 Series will not open for xq7a200t devices

描述

Version Found: 2.0 Rev 3
Version Resolved: See (Xilinx Answer 54025)

When attempting to open the MIG 7 Series GUI within a Vivado project targeting the following devices, an error that the devices are not supported appears.

xq7a200t-1rb676M
xq7a200t-1rb484M
xq7a200t-1rs484M


解决方案

MIG 7 Series designs can be generated for the same density in a -1I or a -1Q.  

This issue only affects -1M parts. 

Generate the design for a -1l or a -1Q as a work around until this support is added.

Revision History:
04/16/2014 - Initial Release

AR# 60000
日期 04/15/2014
状态 Active
Type 已知问题
器件
IP
的页面