UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60995

MIG 7 Series - UG586 - Incorrect CKE_ODT_BYTE_MAP, CKE_MAP and ODT_MAP attributes.

描述

Version Found: MIG 7 Series v2.0 Rev 3
Version Resolved: See (Xilinx Answer 54025)


The CKE_ODT_BYTE_MAP parameter was previously used by the PHY_CONTROL block for CKE/ODT but has since been replaced with the CKE_MAP and ODT_MAP parameters.

解决方案

The CKE_ODT_BYTE_MAP, CKE_MAP and ODT_MAP descriptions are currently missing from UG586.

CKE_ODT_BYTE_MAP must always be set to "00" , please refer to the description stated for ADDR_MAP in UG586 for more information.

Revision History

06/09/2014 - Initial Release

链接问答记录

子答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado N/A N/A
AR# 60995
日期 06/06/2014
状态 Active
Type 已知问题
器件
IP
的页面