AR# 61916

MIG 7 Series AXI DDR3/DDR2 – Enabling “Narrow Burst” option within MIG does not affect the RTL and the parameter remains set to '0'

描述

Version Found: MIG 7 Series v2.2
Version Resolved: See (Xilinx Answer 54025)


When I select narrow burst in the MIG GUI, the parameter for narrow burst in the example_top.v does not reflect this.

How do I enable this?

解决方案

The parameter below:

parameter C_S_AXI_SUPPORTS_NARROW_BURST = 1,

is the parameter that is not updated in the Example Design, but is in the User Design.

Updating this to '0' will resolve this issue for the Example Design.                

Revision History:

09/03/2014 - Initial Release

 

AR# 61916
日期 11/27/2014
状态 Active
Type 综合文章
IP