UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6197

2.1i FPGA Editor - FPGA Editor adds an incorrect file extension when saving designs as macros

Description

Keywords: macro, nmc, ncd, design

Urgency: Standard

General Description:
I am saving a design as a macro. In the "Save As" dialog, I select "Macro", and type in a name with no extension. FPGA Editor then adds a ".ncd" extension and reports the following message:

"The macro filename must have an ".nmc" extension."

解决方案

You must explicitly specify ".nmc" when you type the name; or, if you type the name without the extension and select "Macro" again, this will add the .nmc to the file name.

This will be fixed in a future software release.
AR# 6197
创建日期 04/15/1999
Last Updated 07/09/2001
状态 Archive
Type 综合文章