UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6252

FPGA Configuration - Express Mode fails (INIT Low) for XCS40XL.

Description

Key Words: S40XL, SpartanXL, Express;

Urgency: Hot

General Description:
Express Mode configuration of XCS40XL (SpartanXL) fails with INIT going Low.
(This is a result of an issue in the Mask Layout of the S40XL and does not affect
any other SpartanXL family members.)

解决方案

A patch is now available to correct this problem. It can be obtained at:

http://www.xilinx.com/txpatches/pub/swhelp/M1.5i_updates/15i_sp2_bitgen_sol.tar.gz
http://www.xilinx.com/txpatches/pub/swhelp/M1.5i_updates/15i_sp2_bitgen_hp.tar.gz
http://www.xilinx.com/txpatches/pub/swhelp/M1.5i_updates/15i_sp2_bitgen_pc.zip

CAUTION: This FTP Update is intended as a fast response for this specific
customer issue ONLY. The risk inherent to this fast response is that there are
not enough time or resources available for the full regression testing
that is done for the Service Pack Updates and there is a higher risk of
introducing new problems. It is recommended that customers always install
the latest Service Pack Update, but only install FTP Updates when needed to
resolve specific issues.

NOTE: This FTP Update is only compatible with an A1.5i/F1.5i system that
has Service Pack 2 installed.
AR# 6252
创建日期 08/31/2007
Last Updated 10/31/2000
状态 Archive
Type ??????