AR# 62520

LogiCORE IP SMPTE2022-5/6 Video Over IP Transmitter v4.0 - Why is the Primary MAC address stuck at 0?

描述

Why is the Primary MAC address stuck at 0?

解决方案

This is a known issue with the LogiCORE IP SMPTE2022-5/6 Video Over IP Transmitter v4.0.

It is resolved in the LogiCORE IP SMPTE2022-5/6 Video Over IP Transmitter v4.0 (Rev. 1).

This issue has been resolved in Vivado 2014.4 and later.


For Vivado 2014.3, you can work around this issue by downloading theSMPTE2022-5/6 Video Over IP Transmitter v4.0 (Rev. 1) from the AR62520_v_smpte2022_56_tx_v4_0_Rev_1_preliminary_rev1.zip link below.

INSTALLATION / USE:

  1. Extract the contents of the ".zip" archive to the desired patch directory location.

  2.  
  3. Set the MYVIVADO environment variable to point to this patch directory, for example:

    set MYVIVADO=C:\MYVIVADO\vivado-patch-AR62520\vivado\
  4. Run Vivado software tools from the original install location.

For more information on how to use the MYVIVADO environment variable, see (Xilinx Answer 53821).

附件

文件名 文件大小 File Type
AR62520_v_smpte2022_56_tx_v4_0_Rev_1_preliminary_rev1.zip 2 MB ZIP

链接问答记录

主要问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
53821 Vivado - How do I use the MYVIVADO environment variable to apply tactical patches? N/A N/A
AR# 62520
日期 10/21/2014
状态 Archive
Type 综合文章
IP