UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62731

SDK 2014.4/3 - Program Flash fails when offset is used

描述

Programming the QSPI Flash on any Zynq-7000 device using an offset generates the following error:

In:    serial
Out:   serial
Err:   serial
zynq-uboot> sf probe 0 0 0
SF: Detected S25FL128S_64K with page size 512 Bytes, erase size 128 KiB, total 32 MiB
zynq-uboot>
ERROR: Unknown Error

解决方案

This issue has been addressed in Vivado 2015.1 but the specified offset can only be a multiple of the erase size.

To work around this issue in Vivado 2014.4, you can use the U-Boot to program the QSPI.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
67266 SDK 2014.4 - 发布说明与已知问题 N/A N/A
66376 SDK 2014.3 - 发布说明与已知问题 N/A N/A
AR# 62731
日期 10/18/2018
状态 Active
Type 已知问题
器件
Tools
的页面