We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62774

MIG UltraScale - timing failures may be seen with MIG generated example design


Version Found: MIG UltraScale v6.1
Version Resolved: See (Xilinx Answer 58435)

Timing failures within the MIG UltraScale IP core might be seen when implementing the MIG generated example design.

This only affects the MIG example design as the MIG IP core uses PBLOCK constraints to ensure timing is met when implemented by itself.


If timing failures are seen, you might be able to reduce these failures by using the PBLOCK constraint from the <ip_core_name>.xdc file and applying it to the entire MIG example design. 

For example:
create_pblock pblock_mig_0
add_cells_to_pblock pblock_mig_0 -top
resize_pblock [get_pblocks pblock_mig_0] -add {SLICE_X56Y0:SLICE_X115Y59}

If timing failures are still seen after locking the entire MIG example design logic into one PBLOCK then please open a webcase with Xilinx Technical Support.

Revision History:

11/07/2014 - Initial Release



Answer Number 问答标题 问题版本 已解决问题的版本
58435 UltraScale/UltraScale+ Memory IP - Master Release Notes and Known Issues N/A N/A
AR# 62774
日期 11/11/2014
状态 Active
Type 已知问题