UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6310

F1.5i/F2.1i: XABEL: Syntax Error 1039: Identifier name <signal>.c is already defined, Syntax Error 1030, Syntax Error 1029...

Description

keywords: xabel, abel, error, syntax, 1039, 1030, 1029, identifier,
name, already, defined, inconsistency, number, parameters

Urgency: standard

General description: When compiling or running Check Syntax in the
HDL editor, error messages similar to the following are issued:

Error L57/C21 : Syntax Error 1039: Identifier name 'sig1.C' is already
defined.
Error L57/C22 : Syntax Error 1030: Inconsistency in number of
parameters.
Error L58/C8 : Syntax Error 1029: PIN, NODE, DEVICE, ISTYPE,
MACRO, STATE, PARTITION, GROUP, PLACE, PROPERTY,
STATE_REGISTER or '=' expected

解决方案

These errors will occure if the EQUATIONS statement is missing or
in the wrong location.

Make sure that the EQUATIONS statement is present and hi-lighted
in red.

Note that if a DECLARATIONS statement is inserted after the original
EQUATIONS statement then another EQUATIONS statement needs
to be made before additional design equations can be added to the
ABEL code.
AR# 6310
创建日期 04/28/1999
Last Updated 06/10/2002
状态 Archive
Type 综合文章