UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63609

UltraScale and UltraScale+ Soft Error Mitigation Controller - Release Notes

描述

This is the Release Note Answer Record for the Soft Error Mitigation Controller (SEM IP) for UltraScale FPGA and newer device families.

*** Important Note for SEM IP Designs ***

Beginning with the Vivado 2015.3 release, the SEM IP Product Guide contains an appendix containing the IP Design Checklist.

To aid with integrating SEM IP into a design, review the IP Design Checklist and ensure all recommendations are adhered to:

(PG187) UltraScale Architecture Soft Error Mitigation Controller


Xilinx Forums:

Please seek technical support via the UltraScale Board. The Xilinx Forums are a great resource for technical support. 

The entire Xilinx Community is available to help here, and you can ask questions and collaborate with Xilinx experts to get the solutions you need.

解决方案

Version Information:

Vivado Version IP Version
Vivado 2015.1v2.0 rev2
Vivado 2015.3 v3.0 rev0
Vivado 2015.4v3.0 rev1
Vivado 2016.1v3.1 rev0
Vivado 2016.2v3.1 rev1
Vivado 2016.3v3.1 rev2
Vivado 2017.1v3.1 rev3
Vivado 2017.2v3.1 rev4
Vivado 2017.3v3.1 rev5
Vivado 2017.4v3.1 rev6
Vivado 2018.1v3.1 rev7
Vivado 2018.2v3.1 rev8
Vivado 2018.3v3.1 rev9
Vivado 2018.3.1v3.1 rev10
Vivado 2019.1v3.1 rev11


Supported Devices:

UltraScale FPGA:

The SEM IP supports all UltraScale FPGAs except the XCKU025. The XCKU025 has a reduced set of configuration features. Please refer to (DS890) and (UG570) for more information.

For the supported devices, SEM IP is a Production IP as of Vivado 2016.1.


 

UltraScale+ FPGA and Zynq UltraScale+ MPSoC devices:

Device IP Status Remark
XCKU3PProduction
XCKU5PProduction
XCKU9PProduction
XCKU11PProduction
XCKU13PProduction
XCKU15PProduction
XCVU3PProduction
XCVU5PProduction
XCVU7PProduction
XCVU9PProduction
XCVU11PProduction
XCVU13PProduction
XCVU27PPre-ProductionHardware Validation Pending
XCVU29PPre-ProductionHardware Validation Pending
XCVU31PPre-ProductionHardware Validation Pending
XCVU33PPre-ProductionHardware Validation Pending
XCVU35PPre-ProductionHardware Validation Pending
XCVU37PPre-ProductionHardware Validation Pending
XCZU2Production
XCZU3Production
XCZU4Production
XCZU5Production
XCZU6Production
XCZU7Production
XCZU9Production
XCZU11Production
XCZU15Production
XCZU17Production
XCZU19Production
XCZU21DRProduction
XCZU25DRProduction
XCZU27DRProduction
XCZU28DRProduction
XCZU29DRProduction
XCZU39DRProduction
XCVU45PNot SupportedNot Supported in 2019.1.2
XCVU47PNot SupportedNot Supported in 2019.1.2


 

*This table will be updated for each Vivado tools release, and lists the presently supported device under the most recent version.

**Contact Xilinx Technical Support for more information.


 

General Guidance

Answer RecordTitle Applicable Version
(Xilinx Answer 70684)UltraScale+ - SEM IP - How to use the SEM IP error report to look up essential bit error locations using the EBD (essential bit data) file?
(Xilinx Answer 69888)Soft Error Mitigation (SEM) IP - UltraScale+ Status Heartbeat Gap
(Xilinx Answer 69889)Soft Error Mitigation (SEM) IP UltraScale+ design fails SPI flash timing
(Xilinx Answer 69652)Soft Error Mitigation IP - Mode pins should not be set to 101 for UltraScale/+ SSI devices
(Xilinx Answer 69417)2017.1 write_bitstream - Partial Reconfiguration bitstream is potentially incorrect which may affect device readback
(Xilinx Answer 68978)Soft Error Mitigation (SEM) IP - Using UltraScale+ SEM IP in Vivado IP Integrator2017.1
(Xilinx Answer 67939)Soft Error Mitigation IP - Location of the makedata.tcl file changed since 2016.32016.3
(Xilinx Answer 67178)Soft Error Mitigation (SEM) IP UltraScale and UltraScale+ Bitstream Encryption and Authentication2017.3
(Xilinx Answer 66570)UltraScale Architecture Soft Error Mitigation Controller - Guidance for testing with error injection2015.3
(Xilinx Answer 67086)UltraScale - SEM IP - How to use the SEM IP error report to look up bit error locations using essential bit data in the EBD file?
(Xilinx Answer 67128)SEM support limitations for UltraScale+ ES1 devices
(Xilinx Answer 67180)Can SEM support clock frequencies lower than 8 MHz?
(Xilinx Answer 67041)Soft Error Mitigation (SEM) IP - Using UltraScale SEM IP in Vivado IP Integrator
(Xilinx Answer 65402) Soft Error Mitigation (SEM) IP - Increased interface errors when performing error injection into configuration memory2015.1
(Xilinx Answer 64512) UltraScale SEM v2.0 device and feature support guidance for 2015.12015.1
(Xilinx Answer 65550) Soft Error Mitigation (SEM) IP SSI timing closure might not be met without pin LOCs2015.1
(Xilinx Answer 65551)UltraScale Soft Error Mitigation (SEM) IP XCVU440 makedata.tcl only supports monolithic die SPI flash devices 2016.1
(Xilinx Answer 67041)Soft Error Mitigation (SEM) IP - Using UltraScale SEM IP in Vivado IP Integrator2016.1
(Xilinx Answer 72238)Zynq UltraScale+ MPSoC - Vivado Readback Verify fails when PL SYSMON is configured via APB Slave Interface


 

Known Issues

Answer Record Title Version FoundVersion Resolved
(Xilinx Answer 71155)Soft Error Mitigation IP - VU35P & VU37P reported error locations and address translations might be incorrect2018.22018.3
(Xilinx Answer 71153)Soft Error Mitigation IP - VU37P has incorrect constraint for Frame ECC2018.12018.2
(Xilinx Answer 70487)Soft Error Mitigation IP - Kintex UltraScale KU085 SEM IP will not boot up properly2017.42018.1
(Xilinx Answer 70683)Soft Error Mitigation IP - Example top RTL fetch_rxdata bit width is incorrect 2017.42018.1
(Xilinx Answer 68940)Soft Error Mitigation (SEM) IP UltraScale+ Architecture SSI devices do not assert all of the status_* signals during halt condition (HLT)2017.12017.2
(Xilinx Answer 68939)Soft Error Mitigation (SEM) IP UltraScale+ Architecture SSI VU11P and VU13P Halts during initialization.2017.12017.2
(Xilinx Answer 68977)Soft Error Mitigation (SEM) IP UltraScale+ Architecture VU13P (SSI) Querying frames in SLR 3 does not work2017.12017.2
(Xilinx Answer 68938)Soft Error Mitigation (SEM) IP UltraScale+ Architecture SSI VU13P [Timing 38-282] Negative SETUP slack violation2017.12017.3
(Xilinx Answer 64513) UltraScale SEM v2.0 Query by LFA command does not work for SSI devices2015.12015.3
(Xilinx Answer 65552) UltraScale Soft Error Mitigation (SEM) IP XCVU190 classification makedata.tcl is incorrect 2015.32015.4
(Xilinx Answer 66906)Soft Error Mitigation (SEM) IP [DRC 23-20] Rule violation (PDCN-1569) LUT equation term check2016.12016.3
(Xilinx Answer 66905)Soft Error Mitigation (SEM) IP SSI device status_heartbeat timing violation2016.12016.3
(Xilinx Answer 71314)Guidance and Mitigation for Configuration Readback induced Time Interval Error in MMCMs and PLLsNANA

 

Note: the "version found" column lists the version the problem was first discovered.

The problem may also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

链接问答记录

子答复记录

AR# 63609
日期 08/23/2019
状态 Active
Type 版本说明
器件 More Less
Tools
IP
的页面