We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6447

3.1i Timing Analyzer - Unconstrained path report contains constrained paths


General Description:

When running an Unconstrained Path Report (Analyze

Against Timing Constraints - 'Report unconstrained

paths' option) in Timing Analyzer, the report includes the

timing constraints, then the Unconstrained Path Analysis.

Also See (Xilinx Solution 8072)


The unconstrained paths are listed under the keywords

'Unconstrained Path Analysis' in the Timing Analyzer.

The workaround is to run trace (TRCE) from the

command line with the following syntax:

trce -u 12 design.ncd design.pcf -o output_file.twr

AR# 6447
日期 01/18/2010
状态 Archive
Type 综合文章