AR# 64486

UltraScale RLDRAM3 - tWTR violations seen at frequencies greater than 750MHz


Version Found: RLDRAM3 v7.0

Version Resolved: See (Xilinx Answer 69037)

MIG UltraScale RLDRAM3 designs can see tWTR violations at frequencies greater than 750MHz.

At higher frequencies, additional pipeline logic is added to the RLDRAM3 IP, which under certain traffic patterns can cause a tWTR violation during simulation, or data errors in hardware.

For example:

@         48932281000 tb_top.COMP_INST[0].CIO_MEM.cmd_loop.cmdloop MODEL_ERROR Timing Error                      tWTR_sameaddr check


This can impact Burst Lengths 2, 4, and 8 but is specific to tWTR (Write then Read to the same address).

If the traffic pattern is known (not random) and will never perform a Write then Read to the same address within the tWTR time, then this issue can be disregarded.

If a work-around is required, please contact Xilinx Technical Support for further assistance.

Revision History:

05/07/2015 - Initial Release



Answer Number 问答标题 问题版本 已解决问题的版本
69037 UltraScale/UltraScale+ RLDRAM3 - 发布说明与已知问题 N/A N/A
AR# 64486
日期 12/19/2017
状态 Active
Type 已知问题