We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65462

AXI Bridge for PCI Express Gen3 Subsystem v2.0 (Vivado 2015.3) - Link Up Bit (Bit[11]) in Phy Status Register is Not Asserted


Version Found: v2.0

Version Resolved and other Known Issues: See (Xilinx Answer 6189

When the link is operational, Link Up bit (bit[11]) in Phy Status register does not assert.


The link up signal was connected to the wrong bit order, bit[9] instead of bit[11].

This will be corrected in the next release of the core.

Note: "Version Found" refers to the version where the problem was first discovered.

The problem may also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Revision History:

10/06/2015 - Initial Release

AR# 65462
日期 10/07/2015
状态 Active
Type 综合文章