We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 66572

2015.4 - Vivado IP Integrator - External interrupts are not showing up in the BSP xparameter.h file


I have created a simple Zynq design using Vivado IP Integrator, and have connected the IRQ interrupt externally via the concat IP.

However, when I build the BSP and open the xparameters.h file, I can see that the external ports are missing.

How can I address this?


The port type of the external ports needs to be set to Interrupt. To do this, right click anywhere on the IPI canvas and select "Create Port".

Make sure that the Port Type is set to Interrupt in the Create Port GUI:

AR# 66572
日期 02/12/2016
状态 Active
Type 综合文章
  • Zynq UltraScale+ MPSoC
  • Zynq-7000