We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 671

Error cl192 or cl126 while converting a PALASM (PDS) file


PALCONVT may issue one of the following errors while translating a
PALASM (.PDS) file:

cl192:[Error]Pin '<signal_name>' is not declared as an output pin !

cl126:[Error]The equation input '<signal_name>' is not declared !


PALCONVT only supports PALASM v2.2 and earlier syntax.

Remove any PALASM v2.3 or later syntax from the PDS file. For example,
parentheses are not part of PALASM v2.2 or earlier.

A partial listing of unsupported PALASM syntax can be found in the
XEPLD Reference Guide, near the end of the "PLUSASM Command
Reference" chapter.
AR# 671
日期 10/01/2008
状态 Archive
Type 综合文章