UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6711

2.1i: Floorpanner: Floorplanner does not remove 'constrained' blocks when 'area constraints' is used

Description

Keywords: floorplanner, replace, placement, area, constraint

Urgency: Standard

General Description:
When the option 'Floorplan' -> 'Assign Area Constraint' is done after
'Floorplan' -> 'Replace All with Placement' the original 'Replace All with
Placement' constraint remains as well as the assigned 'Area Constraint'.

解决方案

Before doing an 'Area Constraint', highlight the desired hierarchy in the 'Design
Hierarchy' window. Select 'Floorplan' -> 'Remove'. This will remove the
'Placement Constraint' on the selected hierarchy. Now do 'Floorplan' -> 'Assign
Area Constraint' on the highlighted hierarchy. The hierarchy will now have the
proper constraint on it.

This will be fixed in a future release.
AR# 6711
创建日期 08/31/2007
Last Updated 07/09/2001
状态 Archive
Type ??????