UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67536

2016.2 - IBERT - How to use Tcl to display the BER/error count

描述

In IBERT, is there a Tcl command to display the BER/error count?

解决方案

This is possible with the following Tcl command. 

Note that you will need to modify this command to include your own cable location/number.

set error_count [get_property LOGIC.ERRBIT_COUNT [get_hw_sio_gts localhost:3121/xilinx_tcf/Digilent/210308957937/0_1_0/IBERT/Quad_125/MGT_X0Y4]] puts $error_count
AR# 67536
日期 09/11/2017
状态 Active
Type 综合文章
器件
  • FPGA Device Families
的页面