UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6764

*Obsolete* 2.1i JTAGProgrammer - Error:JTag - The boundary-scan 'program' operation is not supported ... using SVF for the 4002xl-pq100

Description

Keywords: 4002xl SVF

Urgency: Standard

General Description:
When attempting to generate an SVF file for the 4002xl, the following error occurs:

Error:JTag- The boundary-scan 'program' operation is not supported by the
download software on the instance 'output_interface_fpga(Device 1)'
These operations are currently supported only on XilinxCPLD and FPGA devices
'output_interface_fpga(Device 1)': SVF vector generation for programming
terminated due to errors. "

解决方案

This problem is fixed in the latest 2.1i Service Pack available at:
http://www.xilinx.com/support/techsup/sw_updates/

You will also need the BSDL file which can be found at:
http://www.xilinx.com/support/sw_bsdl.htm
AR# 6764
创建日期 08/31/2007
Last Updated 09/26/2005
状态 Archive
Type ??????