UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67684

UltraScale/UltraScale+ Memory IP - moving IP that uses custom memory parts (CSV) might cause problems

描述

Version Found: DDR4 v2.0 (Rev. 1), DDR3 v1.2 (Rev. 1), RLDRAM3 v1.2 (Rev. 1), QDRII+ v1.2 (Rev. 1), QDRIV v1.1 (Rev. 1)

Version Resolved: See (Xilinx Answer 58435)


When moving an existing Memory IP that uses a custom memory part (CSV file), the following errors message might be seen:

[Common 17-55] 'set_property' expects at least one object. ["/ddr4/ddr4_0_example.srcs/constrs_1/imports/par/example_design.xdc":78]
[Mig 66-99] Memory Core Error - [u_ddr4_0] Port(s) c0_ddr4_bg[0],c0_ddr4_bg[1] is/are not placed. Assign all ports to valid sites.
[Synth 8-524] part-select [151:144] out of range of prefix 'mcal_ADR' ["/ddr4/ddr4_0_example.srcs/sources_1/ip/ddr4_0/ip_0/rtl/map/ddr4_0_phy_ddrMapDDR4.vh":254]
[Synth 8-2715] syntax error near , ["/ddr4/ddr4_0_example.srcs/sources_1/ip/ddr4_0/rtl/ip_top/ddr4_0_ddr4.sv":184]

解决方案

These problems can occur when the memory IP is moved into a new Vivado Project or Managed IP project, and the CSV file cannot be found. 

This results in corrupted output products being generated.

Currently, the only work-around is to generate a new Memory IP from scratch using the same custom memory part (CSV) and options. 

This issue will be fixed in a future release of Vivado.

Revision History:

08/08/2016 - Initial Release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
58435 UltraScale/UltraScale+ Memory IP - Master Release Notes and Known Issues N/A N/A
AR# 67684
日期 01/02/2018
状态 Active
Type 已知问题
器件 More Less
Tools
IP
的页面