AR# 67742


LogiCORE IP SMPTE UHD-SDI v1.0 - Synthesis of the UHD-SDI core in Vivado 2016.2 is preventing the receiver from locking to the incoming video


Version 1.0 of the SMPTE UHD-SDI core has the same RTL in Vivado 2016.1 and 2016.2.

However there is an issue with Synthesis of the core in the 2016.2 release where the rx_mode_lock does not lock to the incoming video from the Transmitter.

What could cause this issue and how can I work around it?


This is an issue with the Vivado Synthesis 2016.2 tool when synthesizing the attribute fsm_safe_state = default_state in the v_smpte_uhdsdi_v1_0_rx_autorate.v module of the UHD-SDI core.

The part of the code which demonstrates this issue is shown in the below screen capture:


You can work around this issue by commenting out this attribute, as highlighted in the screen capture.

This attribute does not affect the normal behavior of the UHD-SDI core. This issue should be fixed in the 2016.3 Vivado release, so you will not need to comment this line out when you generate the UHD-SDI core in Vivado 2016.3.



Answer Number 问答标题 问题版本 已解决问题的版本
54547 LogiCORE IP SMPTE UHD-SDI - Release Notes and Known Issues for the Vivado 2015.1 tool and later versions N/A N/A
AR# 67742
日期 09/02/2016
状态 Active
Type 综合文章
People Also Viewed